21. M. Rossi, C. G. Blough, D. H. Raguin, E. K. Popov, and D.
Maystre, “Diffraction efficiency of high-NA continuous-relief
diffractivelenses,”in DiffractiveOpticsandMicro-Optics,Vol.
5 of 1996 OSA Technical Digest SeriesOptical Society of
America, Washington, D.C., 1996, pp. 233–236.
22. J. D. Gaskill, Linear Systems, Fourier Transforms and OpticsWiley, New York, 1978, Chap. 10.2.
23. The CSEM laser-beam-writing system was developed at the
PaulScherrerInstituteZurich,whichwasmergedwithCSEM
in July 1997.
24. M.T.Gale,“Replication,”inMicro-Optics—Elements,Systems,
andApplications,H.P.Herzig,ed.Taylor&Francis,London,
1997.
25. M. Kuittinen, H. P. Herzig, and P. Ehbets, “Improvements in
diffraction efficiency of gratings and microlenses with contin-
uous relief structures,” Opt. Commun. 120, 230–2341995.
26. T. Fujita, H. Nishihara, and J. Koyama, “Blazed gratings and
Fresnel lenses fabricated by electron-beam lithography,” Opt.
Lett. 7, 578–5801982.
27. E. Carcole′, J. Campos, I. Juvells, and S. Bosch, “Diffraction
efficiencyoflow-resolutionFresnelencodedlenses,”Appl.Opt.
33, 6741–67461994.
28. Matlab Optimization Toolbox 1.5, The MathWorks Inc.,
Natick, Mass.1996.
29. D.A.BuralliandG.M.Morris,“Effectsofdiffractionefficiency
on the modulation transfer function of diffractive lenses,”
Appl. Opt. 31, 4389–43961992.
30. P. Ehbets, M. Rossi, and H. P. Herzig, “Continuous-relief fan
outelementswithoptimizedfabricationtolerances,”Opt.Eng.
34, 3456–34641995.
31. F. Nikolajeff, S. Hard, and B. Curtis, “Diffractive microlenses
replicated in fused silica for excimer laser-beam homogeniz-
ing,” Appl. Opt. 36, 8481–84891997.
32. J. Bengtsson, “Direct inclusion of the proximity effect in the
calculation of kinoforms,” Appl. Opt. 33, 4993–49961994.
33. M.Larsson,M.Ekberg,F.Nikolajeff,andS.Hard,“Successive
development optimization of resist kinoforms manufactured
withdirect-writing,electron-beamlithography,”Appl.Opt.33,
1176–11791994.